Bortek Spectrum Film Free All-Purpose Cleaner

A combination of synthetic detergents for multi-purpose cleaning of any surface not harmed by water. Safely and thoroughly performs all cleaning applications including removal of heavy grease and soil. Works equally well in hard or soft, hot or cold water. This moderate foam formula leaves a clean, film free surface, making it the ideal product for scrub and recoats. When used as directed, this all-purpose cleaner aggressively removes embedded soils and scuffs in the top layers of floor finish, and prepares the surface for re-coating with minimal rinsing required.

DIRECTIONS
FOR USE AS AN ALL PURPOSE CLEANER:
Dilute product according to guidelines below:
LIGHT DUTY CLEANING: Use 1 oz. per each gallon of water.
MEDIUM DUTY CLEANING: Use 2 oz. per each gallon of water.
HEAVY DUTY CLEANING: Use 4 oz. per each gallon of water.

Apply product by spray, mop, sponge, cloth or auto-scrubber to surfaces to be cleaned. If necessary, agitate to help remove excessive soils. Wipe dry with clean cloth or rinse thoroughly with clean water after use.

These directions are flexible rather than specific. In many cases a more dilute solution can be used, while for extreme conditions a less dilute solution may be used.

FOR USE AS A SCRUB AND RECOAT CLEANER:
Dilute product at 6 oz. per gallon of water. Apply solution to floor using a mop or automatic scrubber. Allow product to dwell for 3 – 4 minutes. Agitate solution using a blue or green pad or brush. Remove solution from the floor with a mop, wet vacuum or automatic scrubber. Rinse with clean water. Allow floor to dry completely prior to recoating floor with finish.

This product meets the maximum content requirements for Volatile Organic Compounds (VOCs) as established by State and Federal regulations.