Minuteman X Ride 28 Rider Carpet Extractor

The X Ride 28 is a 28” rider carpet extractor which cleans large carpeted areas quickly while the operator rides in comfort. In one pass it scrubs and vacuums up water. Can be purchased with a Chemical Free Solution option that generates ozone to sanitize, deodorize and purify It's compact enough to fit in narrow spaces, but the off-aisle wand allows for cleaning where even the machine cannot go.

Key Features

• Cylindrical scrubbing action cleans both sides of the carpet fiber
• 27 gallon solution tank and 24.5 gallon recovery tank (Large, for less emptying and filling)
• Two nozzle modes : Interim – 1/2 gallon per minute @ 50psi and Restorative – 1 gallon per minute @ 100psi
• Convenient drain port for recovery tank clean-out
• When the on-board charger is plugged in, the machine is not operable
• Off-aisle recovery wand and 25 foot of hose mounted on-board
• AGM maintenance-free battery pack
• Easy-to-understand controls
• Compact, ride-on design results in total operator comfort by focusing on ergonomics
• Sleek design provides an excellent line of sight to the area to be cleaned
• Low sound level
• Tool free brush removal
• Seat sensor shuts off unit once operator leaves platform
• On-board vac & solution wand for maximum water pickup

Specifications

Brush Type: Cylindrical
Front Wheels: 3 inch x 10 inch polyurethane
Front Wheels: 3 inch x 10 inch polyurethane
Performance: 9,060 ft2 /hr (842 m²)
Rated Voltage: 36 volts
Rear Wheels: 3 inch x 12 inch soft ride cross hatch
Recovery Capacity: 24.5 Gal (93 liters)
Solution Capacity: 27 Gal (102 liters)
Vacuum Flow: 152 cfm
Vacuum Power: (2) 36 volt 1 HP (745 W)
Vacuum Waterlift: 70 inches
Weight: 1,315lbs (596 kg)
Weight without drive/batteries: 475 lbs (215 kg)